D-Rope System to Self-Mount

The D-terminal is freely rotatable on the wire rope. There is no need for a shroud tensioner and the bracing is not only cheaper, but also more visually appealing. Elegant, tensile-strength bracing in the architectural sector is simple and cost-effective to implement.

D-terminals for 2+3mm wire ropes can be pressed with the inexpensive impact tool. For 4mm wire rope and above, we recommend the B12 hydraulic hand tool.

As the tensioning sleeves are rotatable, they can be attached to railing posts or other components using normal M6/M8/M10 screws or our special connecting bolts. Angled bracing can be realized with the rod end or clevis. Wall brackets "short" are suitable for straight bracing close to walls and running wires for awnings.